DOUGLAS C. MONTGOMERY

---

Pritsker Award - Annual Teaching Award, Dept. of Industrial and Management Systems Engineering, Arizona State University, 1997

William G. Hunter Award, 1996. Given by the Statistics Division of the American Society for Quality Control.

Brumbaugh Award, 1994. Given by the American Society for Quality Control for the best paper in a journal of the Society.

Distinguished Alumnus, Department of Industrial and Systems Engineering, Virginia Tech (Awarded 1994)

College of Engineering and Applied Sciences, Arizona State University, Teaching Excellence Award (Graduate), 1994

Pritsker Award - Annual Teaching Award, Dept. of Industrial and Management Systems Engineering, Arizona State University 1994

Shewell Award, 1993. Given by the Chemical and Process Industries Division of the ASQC for the best technical paper at the ASQC/ASA Fall Technical Conference, 1992

Anderson Teaching Award, Department of Industrial and Management Systems Engineering, Arizona State University, 1993

Ellis R. Ott Award, 1992. Given by the Ellis R. Ott Foundation for the best paper on quality engineering during a two-year period

Pritsker Award - Annual Teaching Award, Dept. of Industrial and Management Systems Engineering, Arizona State University, 1992

Engineer of the Year, 1987, Puget Sound Engineering Council

Industrial Engineer of the Year, 1986, Puget Sound Region Institute of Industrial Engineers

Alpha Pi Mu/AIIE Outstanding Teacher Award, School of ISyE, Georgia Tech, 1976-1977

Listed: Who's Who in the American South and Southwest, American Men and Women of Science, Who's Who in Engineering

Phi Kappa Phi

Sigma Xi

Alpha Pi Mu

Mu Rho Sigma (Honorary Member, Va. Tech Chapter 1995)

PROFESSIONAL ACTIVITIES

Editor, Journal of Quality Technology, 1994-1997

Advisory Editor in Engineering, John Wiley & Sons, Inc., 1979-1983

Department Editor, Applied Probability and Statistics, IIE Transactions, 1980-1986.

Book Review Editor, Journal of Quality Technology, 1980-1982

Associate Editor, Naval Research Logistics Quarterly, 1982-1988

Associate Editor, Journal of Forecasting, 1981-1983

Associate Editor, Revue Francaise d'Automatique, d'Informatique et de Recherche Operationnelle, 1980-1991

Department Editor, Quality & Reliability Engineering, IIE Transactions, 1992-1994

Editorial Board Member, Journal of Quality Technology, 1980-1982, 1987-present

Editorial Board Member, Quality and Reliability Engineering International, 1994-present

Referee for various journals, including: Technometrics, Operations Research, Management Science, IIE Transactions, Operational Research Quarterly, Journal of Quality Technology, Naval Research Logistics Quarterly, International Journal Production Research, The American Statistician, American Institute of Chemical Engineers Transactions, Communications in Statistics, Journal of Statistical Computation and Simulation, The Engineering Economist, Computers in Industrial Engineering, Transportation Research, Journal of the American Statistical Association.

Technical manuscript reviewer for John Wiley and Sons, McGraw-Hill, Holden-Day, and Duxbury

Research Proposal Reviewer for the National Science Foundation, various divisions

Chairman and organizer of technical paper sessions at several conferences of IIE, ASQC, ORSA/TIMS, and the Winter Simulation Conference

Co-chair for the 12th Annual Quality and Productivity Research Conference, Co-sponsored by ASU and Motorola Semiconductor Products, May 17-19, 1995

Invited short course presenter at the Joint Statistical Meetings (1994), the ASQC/ASA Fall Technical Conference (1982, 1994, 1995, 1996), the U.S. Army Design of Experiments Conference (1994), and the Annual Conference on Applied Statistics (1995).

Speaker for numerous local chapters of IIE, ASA, and ASQC, 1969-present

Participant in several seminar programs for international visitors to Georgia Tech, 1969-1984

SERVICE ACTIVITIES

International Activities and Conference Participation

• Invited speaker, Congress of the International Federation of Nonlinear Analysts, Athens, Greece, July, 1996.
• Keynote Speaker, 8th Israeli Industrial Engineering Conference, Beer Sheva, Israel, 1994
• Keynote Speaker, International Quality Forum, University of Texas El Paso, El Paso, Texas, 1992
• Invited Speaker, Industrial Engineering Symposium, Monterey Institute of Technology, Monterey, Mexico 1991
• Chairman, Regression Methodology Session, International Forecasting Symposium, Quebec, May 1981
• Invited speaker, Symposium on Industrial Engineering, University of Regiomontana, Monterrey, Mexico, September 1980
• Co-Chairman and organizer, Forecasting Session; 24th International TIMS Conference, Honolulu, Hawaii, June 1979
• Consultant to Coca-Cola Export Corporation (includes: Coca-Cola Europe, Coca-Cola Latin America), 1974-1984
• Invited speaker, Joint Meeting of Japan Operations Research Society, Japan Industrial Management Association, and Kansai Institute for Information Systems, Osaka, Japan, August 1977
• Invited speaker, 6th Management Science Colloquium, Osaka University, Japan, August 1977
• Invited speaker, 23rd International Management Science Conference, Athens, Greece, July 1977
• Invited speaker, 2nd Interamerican Conference on Systems and Information Engineering, Mexico City, November 1974
• Visiting Professor of Engineering, Monterrey Institute of Technology, Monterrey, Mexico, spring quarter 1972; co-sponsored by the organization of American States

"Funding for Editorial Operation of JQT," ASQC, 1994-1997 (principal investigator) $315,000.

"Graduate Education in Engineering for Women and Minorities," NSF, 1992-1997 (co-principal investigator) $850,000.

"Process Control Methodology for the Hall Process," Alcoa, 1991 (principal investigator), $65,000.

"Implementation of Design of Experiments," Allied-Signal Aerospace, 1989 (principal investigator) $40,000.

"Statistical Methods for Quality and Process Improvement," IBM Corporation, 1985-1988 (principal investigator) $450,000.

"Process Control and Optimization Studies for Substrate Manufacturing," IBM Corporation, 1985 (principal investigator) $67,000.

"Quality and Process Control in the Factory of the Future," Boeing Electronics Company, 1986 (principal investigator) $25,000.

"Statistical Modeling and Analysis in Quality Assurance," Office of Naval Research, 1979-1985 (principal investigator) $320,000.

"Determination of International Differences in Reported Fire Losses: Update and Extensions," National Fire Data Center, U.S. fire Administration, 1981 (co-principal investigator) $50,000.

"Factor Screening Designs in Computer Simulation Experiments," Office of Naval Research, 1978 (principal investigator) $25,000.

"Studies in Support of the Application of Statistical Methodology to the Design and Evaluation of Operational Tests," Department of the Army, Harry Diamond Laboratories, 1977 (co-principal investigator) $45,000.

"Studies in Support of the Application of Statistical Theory and Methodology to the Design and Evaluation of Operational Tests," Department of the Army, Harry Diamond Laboratories, 1976 (co-principal investigator) $56,000.

"Research Support on Method-Model Development," U.S. Army Material Systems Agency, 1976 (co-principal investigator), $15,000.

"Operational Testing of Complex Command and Control Systems," Department of the Army, Harry Diamond Laboratories, 1974-1975 (principal investigator), $15,000.

PUBLICATIONS

Books

• Hines, W. W. and D. C., Montgomery (1990), Probability and Statistics in Engineering and Management Science, 3rd edition, John Wiley & Sons, New York. (1st edition 1972, 2nd edition 1980).
• Johnson, L. A. and D. C. Montgomery (1974), Operations Research in Production Planning, Scheduling, and Inventory Control, John Wiley & Sons, New York.
• Montgomery, D. C. (1997), Design and Analysis of Experiments, 4th edition, John Wiley & Sons, New York. (1st edition, 1976, 2nd edition, 1984, 3rd edition, 1991).
• Montgomery, D. C. and E. A. Peck (1992), Introduction to Linear Regression Analysis, 2nd edition, John Wiley & Sons, New York. (Probability and Statistics Series; 1st edition, 1983).
• Montgomery, D. C. (1996), Introduction to Statistical Quality Control, 3rd edition, John Wiley & Sons, New York. (1st edition, 1985, 2nd edition, 1991).
• George, M. L., Gooch, J. and D. C. Montgomery (1986), America Can Compete, SMU Press, Dallas, TX.
• Montgomery, D. C., Johnson, L. A. and J. S. Gardiner (1990), Forecasting and Time Series Analysis, 2nd edition, McGraw-Hill, New York. (1st edition 1976).
• Keats, J. B. and D. C. Montgomery (editors) (1991), Statistical Process Control in Manufacturing, Marcel Dekker, New York.
• Montgomery, D. C. and G. C. Runger (1994), Applied Statistics and Probability for Engineers, John Wiley & Sons, New York.
• Myers, R. H. and D. C. Montgomery (1995), Response Surface Methodology : Process and Product Optimization Using Designed Experiments, John Wiley & Sons, New York (Probability and Statistics Series).
• Keats, J. B. and D. C. Montgomery (editors) (1996), Statistical Applications in Process Control, Marcel Dekker, New York.

• Montgomery, D. C. (1968), "An Introduction to Short-Term Forecasting," The Journal of Industrial Engineering, Vol. 11, No. 10, this paper was also selected for inclusion in Mathematical Models in Marketing, by Robert G. Murdick, International Textbook Co. (1971).
• Montgomery, D. C. (1969), "An Application of Statistical Forecasting Techniques in an Inventory Control Policy," Production and Inventory Management, Vol. 10, No. 1.
• Dickey, J. W. and D. C. Montgomery (1970) "A Simulation-Search Technique: An Example Application for Left-Turn Phasing," Transportation Research, Vol. 4.
• Montgomery, D. C. (1970), "Adaptive Control of Exponential Smoothing Parameters by Evolutionary Operation," AIIE Transactions, Vol. 2, No. 3.
• Ghare, P. M., D. C. Montgomery and W. C. Turner (1971), "Optimal Interdiction Policy for a Flow Network" Naval Research Logistics Quarterly, Vol. 18, No. 1.
• Montgomery, D. C. and P. J. Klatt (1972), "Minimum Cost Multivariate Quality Control Tests," AIIE Transactions, Vol. 4, No. 2; this paper also appeared in Proceedings of the AIIE Annual Conference, Anaheim, California, June 1972.
• Sipper, D. and D. C. Montgomery (1972), "Probability Zones in Stochastic Project Networks," Journal of Systems Management, Vol. 23, No. 8
• Montgomery, D. C., J. J. Talavage and C. J. Mullen (1972), "A Response Surface Approach to Improving Traffic Signal Settings in a Street Network," Transportation Research, Vol. 6.
• Montgomery, D. C. and P. J. Klatt (1972), "Economic Design of T2 control Charts to Maintain Current Control of a Process," Management Science, Vol. 19, No. 1.
• Montgomery, D. C., M. S. Bazaraa and A. J. Keswani (1973), "Inventory Models with a Mixture of Backorders and Lost Sales," Naval Research Logistics Quarterly, Vol. 20.
• Horwitz, J. S. and D. C. Montgomery (1974), "A Computer Simulation Model of a Rubella Epidemic," Computers in Biology and Medicine, Vol. 4, No. 2.
• Heikes, R. G., D. C. Montgomery, and J. Young (1974), "Alternative Process Models in the Economic Design of T2 Control Charts," AIIE Transactions, Vol. 6, No. 1.
• Montgomery, D. C., R. G. Heikes and J. F. Mance (1975), "Economic Design of Fraction Defective Control Charts," Management Science, Vol. 21, No. 11.
• Heikes, R. G., D. C. Montgomery, and R. L. Rardin (1976), "Using Common Random Numbers in Simulation Experiments--An Approach to Statistical Analysis," Simulation, Vol. 27, No. 3.
• Montgomery, D. C. and R. G. Heikes (1976), "Process Failure Mechanisms and Optimal Fraction Defective Control Charts," AIIE Transactions, Vol. 8, No. 4.
• Montgomery, D. C. and L. E. Contreras (1977), "A Note on Forecasting with Adaptive Filtering," Operational Research Quarterly, Vol. 28, No. 1.
• Montgomery, D. C. (1977), "Discussion of 'Studies in a Simulated Job Shop'" by S. Eilon and I. Chowdhury, Invited Discussion, Proceedings of the Institution of Mechanical Engineers, London, Vol. 189.
• Montgomery, D. C. and V. M. Bettencourt (1977), Jr., "Multiple Response Surface Methods in Computer Simulation," Simulation, Vol. 29, No. 4.
• Stewart, R. D., D. C. Montgomery and R. G. Heikes (1978), "Choice of Double Sampling Plans Based on Prior Distributions and Costs," AIIE Transactions, Vol. 10, No. 1.
• Montgomery, D. C. (1980), "The Economic Design of Control Charts: A Review and Literature Survey," Journal of Quality Technology, Vol. 12, No. 2.
• Montgomery, D. C. and R. G. Conard (1980), "Comparison of Simulation and Flight-Test Data for Missile Systems," Simulation, Vol. 31.
• Montgomery, D. C., E. W. Martin and E. A. Peck (1980), "Interior Analysis of the Observations in Multiple Linear Regression," Journal of Quality Technology, Vol. 12, No. 3.
• Askin, R. G. and D. C. Montgomery (1980), "Augmented Robust Estimators," Technometrics, Vol. 22, No. 3.
• Montgomery, D. C. and G. Weatherby (1980), "Modeling and Forecasting Time Series Using Transfer Function and Intervention Methods," AIIE Transactions, Vol. 12, No. 4.
• Montgomery, D. C. and R. G. Askin (1981), Problems of Nonnormality and Multicollinearity for Forecasting Methods Based on Least Squares," AIIE Transactions, Vol. 13, No. 2.
• Saniga, E. W. and D. C. Montgomery (1981), "Economical Quality Control Policies for a Single-Cause System," AIIE Transactions, Vol.. 13, No. 3.
• Montgomery, D. C. (1982), "Economic Design of an Control Chart," Journal of Quality Technology, Vol. 14, No. 2.
• Montgomery, D. C. and L. Greene (1983), "Validation of Computer Simulation Models of Missile Systems," Journal of Spacecraft and Rockets, Vol. 20, No. 3.
• Askin, R. G. and D. C. Montgomery (1984), "An Analysis of Constrained Robust Regression Estimators," Naval Research Logistics Quarterly, Vol. 31, No. 2.
• Friedman, D. J. and D. C. Montgomery (1985), "Evaluation of the Predictive Performance of Biased Regression Estimators," Journal of Forecasting, Vol. 4, No. 2.
• Montgomery, D. C. (1985), "The Effect of Non-normality on Variables Sampling Plans," Naval Research Logistics Quarterly, Vol. 32, No. 1.
• Montgomery, D. C., Panagos, M., and R. G. Heikes (1985), "Economic Design of Control Charts for Two Manufacturing Process Models," Naval Research Logistics Quarterly, Vol. 32. No. 4.
• Montgomery, D. C. and R. H. Storer (1986), "Economic Models and Process Quality Control," Quality and Reliability Engineering International, Vol. 2, No. 4.
• Gardiner, J. S. and D. C. Montgomery (1987), "Using Statistical Control Charts for Software Quality Control," Quality and Reliability Engineering International, Vol. 3, No. 1.
• Gardiner, J. S., Friedman, D. J. and D. C. Montgomery (1987), "A Note on the Average Run Length of Cumulative Sum Control Charts for Count Data," Quality and Reliability Engineering International, Vol. 3, No.1.
• Montgomery, D. C. (1988), "Experiment Design for Product and Process Optimization," SAE Transactions, Fall Volume.
• Yourstone, S. A. and D. C. Montgomery (1989), "A Time-Series Approach to Discrete Real-Time Process Quality Control," Quality and Reliability Engineering International, Vol. 5, No. 4.
• Montgomery, D. C. (1990-91), "Using Fractional Factorial Designs for Robust Process Development," Quality Engineering, Vol. 3, No. 2.
• Yourstone, S. A. and D. C. Montgomery (1991), "Detection of Process Upsets-Sample Autocorrelation Control Chart and Group Autocorrelation Control Chart Applications," Quality and Reliability Engineering International, Vol. 7.
• Montgomery, D. C. and C. M. Mastrangelo (1991), "Some Statistical Process Control Methods for Autocorrelated Data," (with discussion), Journal of Quality Technology, Vol. 23, No. 3.
• Chua, M. K. and D. C. Montgomery (1991), "A Multivariate Quality Control Scheme," International Journal of Quality and Reliability Management, Vol. 8, No. 6.
• Hubele, N. F., D. C. Montgomery and W. H. Chin (1991 - 1992), "An Application of Statistical Process Control in Jet-Turbine Engine Component Manufacturing," Quality Engineering, Vol. 4, No. 2.
• Chua, M. K. and D. C. Montgomery (1992), "Investigation and Characterization of a Control Scheme for Multivariate Quality Control," Quality and Reliability Engineering International, Vol. 8.
• Montgomery, D. C. (1992), "The Use of Statistical Process Control and Design of Experiments in Product and Process Development," IIE Transactions, Vol. 24, No. 5.
• Coleman, D. E. and D. C. Montgomery (1993), "A Systematic Approach to Planning for a Designed Industrial Experiment," (with discussion), Technometrics, Vol. 35, No. 1.
• Montgomery, D. C. and D. J. Friedman (1993), "Prediction Using Regression Models with Multicollinear Predictor Variables," IIE Transactions, Vol. 25, No. 3.
• Runger, G. C. and D. C. Montgomery (1993), "Adaptive Sampling Enhancements for Shewhart Control Charts," IIE Transactions, Vol. 25, No. 3.
• Montgomery, D. C. and G. C. Runger (1993), "Gage Capability and Designed Experiments, Part I: Basic Methods," Quality Engineering, Vol. 6.
• Montgomery, D. C. and G. C. Runger (1993), "Gage Capability and Designed Experiments, Part II: Experimental Design Models and Variance Component Estimation," Quality Engineering, Vol. 6.
• Del Castillo, E. and D. C. Montgomery (1993), "A Nonlinear Programming Solution to the Dual Response Problem," Journal of Quality Technology, Vol. 25, No. 3.
• Del Castillo, E. and D. C. Montgomery (1993), "Optimal Design of Control Charts for Monitoring Short Production Runs," Economic Quality Control, Vol. 8, No. 4.
• Montgomery, D. C. and S. R. Voth (1994), "Multicollinearity and Leverage in Mixture Experiments," Journal of Quality Technology, Vol. 26, No. 2.
• Montgomery, D. C., J. B. Keats (1994), G. C. Runger, and W. S. Messina, "Integrating Statistical Process Control and Engineering Process Control," Journal of Quality Technology, Vol. 26, No. 2.
• Del Castillo, E. and D. C. Montgomery (1994), "Short-Run Statistical Process Control: Q-Chart Enhancements and Alternatives," Quality and Reliability Engineering International, Vol. 10, No. 2.
• Prabhu, S. S., D. C. Montgomery, and G. C. Runger (1994), "A Combined Adaptive Sample Size and Adaptive Sampling Interval Control Scheme," Journal of Quality Technology, Vol. 26, No. 3.
• Torng, James C., D. C. Montgomery and J. K. Cochran (1994), "Economic Design of the EWMA Control Chart," Economic Quality Control, Vol. 9, No. 1.
• Heinsman, J. A. and D. C. Montgomery (1995), "Optimization of a Household Product Formulation Using a Mixture Experiment," Quality Engineering, Vol. 7, No. 3.
• Prabhu, S. S., D. C. Montgomery, and G. C. Runger (1995), "A Design Tool to Evaluate Average Time to Signal Properties of Adaptive Control X-Bar Charts," Journal of Quality Technology, Vol. 27, No. 1.
• Del Castillo, E. and D. C. Montgomery (1995), "A Kalman Filtering Process Control Scheme with an Application to Semiconductor Short-Run Manufacturing," Quality and Reliability Engineering International, Vol. 11, No. 2.
• Mastrangelo, C. M. and D. C. Montgomery (1995), "SPC with Correlated Observations for the Chemical and Process Industries," Quality and Reliability Engineering International, Vol. 11, No. 2.
• Montgomery, D. C., J. C-C. Torng, J. K. Cochran, and F. P. Lawrence (1995), "Economic Statistical Design of the EWMA Control Chart", Journal of Quality Technology, Vol. 27, No. 2.
• Torng, J. C-C., J. K. Cochran, D. C. Montgomery, and F. P. Lawrence (1995), "Implementing Economic Statistical EWMA Control Charts", Journal of Quality Technology, Vol. 27, No. 2.
• Annadi, H.P., J. B. Keats, G. C. Runger, and D. C. Montgomery (1995), "An Adaptive Sample Size CUSUM Control Chart," International Journal of Production Research, Vol. 33, No. 6.
• Grayson, J. M., G. C. Runger, and D. C. Montgomery (1995), "Average Run Length Performance of the U Chart with Control Limits Based on the Average Sample Size," Quality Engineering, Vol. 8, No. 1.
• Lowry, C. A. , and D. C. Montgomery (1995), "A Review of Multivariate Control Charts," IEE Transactions, Vol. 27, No. 6.
• Del Castillo, E. and D. C. Montgomery (1996), "A General Model for the Optimal Economic Design of Charts Used to Control Short or Long Run Processes," IEE Transactions, Vol. 28, No. 3..
• Del Castillo, E., P. Mackin, and D. C. Montgomery (1996), "Multiple Criteria Optimal Design of Control Charts," IIE Transactions, Vol. 28, No. 6.
• Scranton, R., G. C. Runger, J. B. Keats and D. C. Montgomery (1996), "Efficient Shift Detection Using Multivariate EWMA Control Charts and Principal Components", Quality and Reliability Engineering International, Vol. 12, No. 3.
• Cornell, J. A. and D. C. Montgomery (1996), "Fitting Models to Data: Interaction Versus Polynomial? Your Choice!", Communications in Statistics-Theory and Methods, Vol. 25, No. 11.
• Del Castillo, E., Montgomery, D. C., and D. R. McCarville (1996), "Modified Desirability Functions for Multiple Response Optimization", Journal of Quality Technology, Vol. 28, No. 3.
• Cornell, J. A. and D. C. Montgomery (1996), "Interaction Models as Alternatives to Low-Order Polynomials", Journal of Quality Technology, Vol. 28, No. 2.
• Mastrangelo, C. M., Runger, G. C. and D. C. Montgomery (1996) "Statistical Process Monitoring with Principal Components", Quality and Reliability Engineering International, Vol. 12, No. 3.
• Shumate, D. A. and D. C. Montgomery (1996), "Development of a TiW Plasma Etch Process Using a Mixture Experiment and Response Surface Methodology", IEEE Transactions on Semiconductor Manufacturing, Vol. 9, No. 3.
• Runger, G. C., Alt, F. A., and D. C. Montgomery (1996), "Contributors to a Multivariate Statistical Process Control Signal", Communications in Statistics - Theory and Methods, Vol. 25, No. 10.
• Montgomery, D. C. and G. C. Runger (1996), "Fold-Overs of 2^k-p Resolution IV Designs", Journal of Quality Technology, Vol. 28, No. 4.
• Keats, J.B., Montgomery, D.C., Runger, G.C., and W.S. Messina (1996), "Feedback Control and Statistical Process Monitoring", International Journal of Reliability, Quality and Safety Engineering, Vol. 3, No. 3.
• Runger, G. C., Alt, F. B., and D. C. Montgomery (1996), "Controlling Multiple Stream Processes with Principal Components", International Journal of Production Research, Vol. 34, No. 11.
• Del Castillo, E., Grayson, J. M., Montgomery, D. C., and G. C. Runger (1996), "A Review of Statistical Process Control Techniques for Short-Run Manufacturing Systems", Communications in Statistics-Theory and Methods, Vol. 25, No. 11.
• Rhoads, T. R., D. C. Montgomery, and C. M. Mastrangelo (1996), "A Fast Initial Response Scheme for the Exponentially Weighted Moving Average Control Chart", Quality Engineering, Vol. 9, No. 2..
• Somerville, S. E. and D. C. Montgomery (1996), "Process Capability Indices and Nonnormal Distributions", Quality Engineering, Vol. 9, No. 2.
• McCarville, D. R., and D. C. Montgomery (1996), "Optimal Guard Bands for Gauges in Series", Quality Engineering, Vol. 9, no. 2.
• Kennedy, D. J., Montgomery, D. C., and Quay, B. H. (1996), "Stochastic Environmental Life Cycle Assessment Modeling", International Journal of Life Cycle Assessment, Vol. 1, No. 4.
• Simpson, J.R., and Montgomery, D. C. (1996), "A Biased-Robust Regression Technique for the Combined Outlier-Multicollinearity Problem", Journal of Statistical Computation and Simulation, Vol. 56.
• Montgomery, D. C., and Woodall, W. H. (1997) (editors), "A Discussion on Statistically-Based Process Monitoring and Control", Journal of Quality Technology, Vol. 29, No. 2.
• Lawson, C., Keats, J. B., and Montgomery, D. C. (1997), "Comparison of Robust and Least Squares Regression in Computer-Generated Probability Plots", IIE Transactions on Reliability, Vol. 46, No. 1.
• Prabhu, S. S., Montgomery, D. C., and G. C. Runger (1997), "Economic-Statistical Design of an Adaptive Control Chart", International Journal of Production Economics, Vol. 49.
• Montgomery, D. C., Keats, J. B., Fowler, J. W., Runger, G. C., and Rajavelu, G. (1997), "Statistical Monitoring Techniques for Contamination Data", Journal of the Institute of Environmental Sciences, Vol. XL, No. 2.

• Schaub, D. A., and D. C. Montgomery, "Using Experimental Design to Optimize the Stereolithography Process", Quality Engineering
• Prabhu, S. S., Runger, G. C., and D. C. Montgomery, "Selection of the Subgroup Size and Sampling Interval for a CUSUM Control Chart", IIE Transactions
• Montgomery, D. C., Borror, C. M., and J. D. Stanley, "Some Cautions in the Use of Plackett-Burman Designs", Quality Engineering
• Runger, G.C., and Montgomery, D.C., "Multivariate and Univariate Process Control: Geometry and Shift Directions", Quality and Reliability Engineering International
• Andere-Rendon, J., Montgomery, D. C., and Rollier, D. A., "Design of Mixture Experiments Using Bayesian D-Optimality", Journal of Quality Technology.
• Myers, R. H., and Montgomery, D. C., "A Tutorial on Generalized Linear Models", Journal of Quality Technology
• Montgomery, D. C., Peck, E.A., and Simpson, J.R., "Multicollinearity and Biased Estimation in Regression", to appear in the Handbook of Statistical Methods for Engineers and Physical Scientists, edited by H.M. Wadsworth, Jr., McGraw-Hill
• Zimmer, L. S., Montgomery, D. C., and Runger, G.C., "Evaluation of a Three-State Adaptive Sample Size X-Bar Control Chart", International Journal of Production Research
• Bowles, M.L., and Montgomery, D.C., "How to Formulate the Ultimate Margarita: A Tutorial on Experiments with Mixtures", Quality Engineering
• Borror, C. M., Montgomery, D. C., and Runger, G. C., "Confidence Intervals on Variance Components from Gauge Capability Studies", Quality and Reliability Engineering International
• Schaub, D.A., Chu, K.-R., and Montgomery, D.C., "Optimizing Stereolithography Throughput", Journal of Manufacturing Systems

• Johnson, L. A. and D. C. Montgomery (1978), "Production and Inventory Control," The Encyclopedia of Computer Science and Technology, Vol. 10, Marcel Dekker, New York.
• Johnson, L. A. and D. C. Montgomery (1979), "Forecasting with Exponential Smoothing and Related Methods," Forecasting, Vol. 12, TIMS Studies in the Management Sciences, North-Holland, Amsterdam.
• Montgomery, D. C. and D. J. Friedman (1989), "Statistical Process Control in a Computer-Integrated Manufacturing Environment," Statistical Process Control in Automated Manufacturing, J. B. Keats and N. F. Hubele, editors, Marcel Dekker, New York.
• Montgomery, D. C. and E. A. Peck (1990), "Multicollinearity in Regression," Handbook of Statistical Methods for Engineers, McGraw-Hill Book Co., H.M. Wadsworth, Jr., editor, McGraw-Hill, New York.
• Montgomery, D. C. (1991), "Analyzing Location and Dispersion Effects from Designed Experiments: Same Examples," Statistical Process Control in Manufacturing, J. B. Keats and D. C. Montgomery, editors, Marcel Dekker, New York.
• Messina, W. S., Montgomery, D. C., Keats, J. B. and G. C. Runger (1996), "Strategies for Statistical Monitoring of Integral Control for the Continuous Process Industries", in Statistical Applications in Process Control, edited by J. B. Keats and D. C. Montgomery, Marcel Dekker, New York.
• Montgomery, D. C. (1996), "Some Practical Guidelines for Designing an Industrial Experiment", in Statistical Applications in Process Control, edited by J. B. Keats and D. C. Montgomery, Marcel Dekker, New York.
• Montgomery, D. C. and G. C. Runger (1996), "Experimental Design Models with Random Components", in Statistical Applications in Process Control, edited by J. B. Keats and D. C. Montgomery, Marcel Dekker, New York.
• McCarville, D. R. and D. C. Montgomery (1996), "Optimizing Defect Levels and Losses from Gage Errors", in Statistical Applications in Process Control, edited by J. B. Keats and D. C. Montgomery, Marcel Dekker, New York.
• Mastrangelo, C. M. and D. C. Montgomery (1996), "Time Series Analysis," Encyclopedia of Operations Research and Management Science, Kluwer Academic Publishers, Norwell, MA

• Montgomery, D. C. (1971), "Stochastic Capacity Decision Models for Production Facilities," Proceedings of the AIIE Annual Conference, Boston, MA.
• Ghare, P. M. and D. C. Montgomery (1970), "Flow Management in Transportation Networks," Proceedings of the Fifth International Conference on Operations Research, Venice, Italy, June 1969, Tavistock Publishers, Ltd..
• Montgomery, D. C. and H. M. Wadsworth (1972), "Some Techniques for Multivariate Quality Control Applications," Transactions of the ASQC, Washington, D.C.
• Marsh, J. D. and D. C. Montgomery (1973), "Optimal Procedures for Scheduling Jobs with Sequence-Dependent Changeover Times on Parallel Processors," Proceedings of the AIIE Annual Conference, Chicago, IL.
• Johnson, L. A. and D. C. Montgomery (1974), "On Dynamic Production Planning Models," Proceedings of the Southeast IDS Meeting, New Orleans, LA.
• Montgomery, D. C., J. F. Mance and R. G. Heikes (1974), "An Economic Model of the Fraction Defective Control Chart with Multiple Assignable Causes," Transactions of the ASQC, Boston, MA.
• Brown, E. L. and D. C. Montgomery (1975), "An Application of Network Simulation to Operational Testing and Evaluation," Proceedings of the 14th Annual U.S. Army Operations Research Symposium, Ft. Lee, VA., November.
• Friese, W. F., Jr., and D. C. Montgomery (1977), "A Cost-Optimal Approach to Selecting a Fractional Factorial Design," Proceedings of the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee, VA.
• Russ, S. W., Jr., D. C. Montgomery, and H. M. Wadsworth, Jr., (1977) "A Cost Optimal Approach to Selection of Experimental Designs for Operational Testing Under Conditions of Constrained Sample Size," Proceedings of the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee, VA.
• Simms, E. D. and D. C. Montgomery (1977), "The Use of Discriminant Analysis for Risk Assessment in Operational Testing," Proceedings of the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee, VA.
• Montgomery, D. C. and G. Weatherby (1979), "Factor Screening Methods in Computer Simulation," Proceedings of the Winter Simulation Conference, San Diego, CA.
• Montgomery, D. C. and E. A. Peck (1980), "The Multicollinearity Problem in Regression," Proceedings of the Southeast Decision Sciences Conference, Orlando, FL.
• Montgomery, D. C. (1981), "Cost Based Acceptance Sampling Plans and Process Control Schemes," Proceedings of the AIIE Fall Conference, Washington, D. C.
• Montgomery, D. C., Heikes, R. G., and M. R. Scheffler (1981), "Probability Models for the Occurrence of Defects," Frontiers in Statistical Quality Control, H. J. Lenz, G. B. Wetherill and P.Th. Wilrich, Editors, Physica-Verlag, Vienna.
• Montgomery, D. C. (1983), "Statistical Consulting: Some Comments on Training of Statisticians," Proceedings of the SAS Users Group International, New Orleans, LA.
• Montgomery, D. C. (1984), "Biased Estimation and Robust Regression," Proceedings of the American Association of Physicists in Medicine Midyear Topical Symposium, Mobile, AL.
• Montgomery, D. C., Gardiner, J. S., and B. A. Pizzano (1987), "Statistical Process Control Methods for Detecting Small Process Shifts," Frontiers in Statistical Quality Control, H. J. Lenz et al., editors, Physica-Verlag, Heidelberg.
• Montgomery, D. C. (1989), "Rational Subgroups and Control Charts," Proceedings of the Arizona State University Conference on Statistical Control and Design, Tempe, AZ.
• Montgomery, D. C. (1991), "Experimental Design in Engineering Design and Development," Proceedings of the SAS Users Group International, New Orleans, LA.
• Montgomery, D. C. and C. M. Mastrangelo (1991), "Basic Properties of the EWMA," Proceedings of the Arizona State University Conference on Statistical Control and Design, Tempe, AZ.
• Montgomery, D. C. (1992), "Some Problems in Computer-aided Design of Experiments," Proceedings of the SAS Users Group International Honolulu, HI.
• Lowry, C. A. and D. C. Montgomery (1992), "Multivariate Quality Control: Review and Enhancement," Proceedings of the Institute for Decision Sciences Conference, San Francisco, CA..
• Montgomery, D. C., C. M. Mastrangelo, and C. A. Lowry (1993), "Statistical Process Monitoring for Dynamic Systems," Proceedings of the Industrial Engineering Research Conference, San Francisco, CA.
• Montgomery, D. C., and J. E. Taggart (1993), "Selection of a Second Order Response Surface Design," Proceedings of the SAS Users Group International, New York, NY.
• Mastrangelo, C. M., and D. C. Montgomery (1994), "Shift Detection Properties of Moving-Centerline EWMA Control Schemes", Proceedings of the Industrial Engineering Research Conference, Atlanta, GA.
• Montgomery, D. C. (1994), "Strategies for Integrating Statistical Process Control and Engineering Process Control", Proceedings of the Rutgers Conference on Computer Integrated Manufacturing in the Process Industries, Piscataway, NJ.
• Myers, R. H. and D. C. Montgomery (1994), "Robust Design and Response Surface Methodology", Proceedings of the 50th Conference on Applied Statistics, Atlantic City, NJ.
• Montgomery, D. C. and M. L. Bowles (1995), "Multiple Response Optimization Methods", Proceedings of the Annual Conference on Applied Statistics, Atlantic City, NJ.
• Montgomery, D. C., Keats, J. B., and G. Rajavelu (1996), "Statistical Monitoring Techniques for Contamination Data", Institute of Environmental Sciences-Proceedings, Orlando, Fl.
• Rhoads, T. R. and D. C. Montgomery (1996), "Process Monitoring with Principal Components and Partial Least Squares", Proceedings of the Industrial Engineering Research Conference, Minneapolis, MN.

Papers Presented at Meetings

• Montgomery, D. C. (1970), "Evolutionary Operation and Machine Center Capacity Control in Job-Shop Systems," contributed paper presented at the 11th American Meeting of TIMS, Los Angeles, California.
• Ghare, P. M. and D. C. Montgomery (1969), "Flow Management in Transportation Networks," invited paper presented at the 5th International Conference on Operations Research, Venice, Italy, also in Conference Proceedings.
• Fabrycky, W. J., V. Chachra and D. C. Montgomery (1970), "A Simulation Study of Three Classes of Job-Shop Sequencing Rules," invited paper presented at the 13th International Meeting of APICS, Cincinnati, Ohio.
• Montgomery, D. C. (1970), "Expectations of Young Engineers from Their Employers and Professional Societies," invited paper presented at the 13th International Meeting of APICS, Cincinnati, Ohio.
• Montgomery, D. C. (1971), "Stochastic Capacity Decision Models for Production Facilities," invited paper presented at the AIIE Annual Conference, Boston, Massachusetts, also in Conference Proceedings.
• Montgomery, D. C. and H. M. Wadsworth (1972), "Some Techniques for Multivariate Quality Control Applications," invited paper presented at the American Society for Quality Control Annual Conference, Washington, D.C., also in Conference Proceedings.
• Montgomery, D. C. and P. J. Klatt (1972), "Minimum Cost Multivariate Quality Control Tests," invited paper presented at the AIIE Annual Conference, Anaheim, California, also in Conference Proceedings and subsequently published in AIIE Transactions.
• Montgomery, D. C. and D. M. Evans (1972), "Second Order Response Surface Designs in Digital Simulation," invited paper presented at the 41st National ORSA Meeting, New Orleans, Louisiana, a revised version of this paper was subsequently published in Simulation.
• Marsh, J. D and D. C. Montgomery (1973), "Optimal Procedures for Scheduling Jobs with Sequence-Dependent Changeover Times on Parallel Processors," invited paper presented at the AIIE Annual Conference, Chicago, Illinois.
• Alt, F. B., J. J. Goode, D. C. Montgomery and H. M. Wadsworth (1973), "Variable Control Charts for Multivariate Data," invited paper presented at the American Statistical Association Meeting, New York.
• Heikes, R. G., D. C. Montgomery and J. Young (1973), "Alternate Process Models in the Economic Design of T2 Control Charts," presented at the 44th National ORSA Meeting, San Diego, California, subsequently published in AIIE Transactions.
• Montgomery, D. C. and C. K. Hudson (1973), "Use of Equiradial Designs in Response Surface Methodology," presented at the 44th National ORSA Meeting, San Diego, California.
• Johnson, L. A. and D. C. Montgomery (1974), "On Dynamic Production Planning Models," invited paper presented at the Distinguished Scholars Seminar, Southeast Institute of Decision Sciences Meeting, New Orleans, Louisiana, also in Conference Proceedings.
• Marsh, J. D. and D. C. Montgomery (1974), "Scheduling Jobs with Sequence Dependent Setup Times on Parallel Machines," presented at the 45th National ORSA Meeting, Boston, Massachusetts.
• Montgomery, D. C. (1974), "Experimental Design Techniques for Computer Simulation," invited paper at the Second Interamerican Conference on Information and Systems Engineering, Mexico City.
• Cummings, J. M., B. B. McCra, D. C. Montgomery and R. G. Heikes (1974), "Repairing Response Surface Designs to Minimize Bias," presented at the 46th National ORSA Meeting, San Juan, Puerto Rico.
• Montgomery, D. C., R. G. Heikes, and Y. G. Yap (1975), "A Comparison of Two Adaptive Forecasting Systems," presented at the 47th National ORSA Meeting, Chicago, Illinois.
• Gearing, D. V., R. G. Heikes and D. C. Montgomery (1975), "Development of an Economic Model of Moving Average Control Charts," presented at the Fall 1975 ORSA/TIMS National Meeting, Las Vegas.
• Johnson, L. A. and D. C. Montgomery (1975), "Planning Lot Size Production for Inventory," invited paper presented at the Fall ORSA/TIMS National Meeting, Las Vegas.
• Johnson, L. A. and D. C. Montgomery (1975), "Forecasting and Time Series Analysis," seminar presented at the 3rd Annual AIIE Fall Systems Engineering Conference, Las Vegas.
• Brown, E. L. and D. C. Montgomery (1975), "An Application of Network Simulation to Operational Testing and Evaluations," presented at the 14th Annual U.S. Army Operations Research Symposium, Ft. Lee, Virginia, also in Conference Proceedings.
• Montgomery, D. C. and V. M. Bettencourt, Jr. (1976), "A Review of Multiple Response Surface Methods in Computer Simulation," invited paper presented at the Fall ORSA/TIMS National Meeting, Miami, Florida.
• Johnson, L. A. and D. C. Montgomery (1977), " Forecasting with Prediction Limits," invited paper presented at the 23rd International TIMS Conference, Athens, Greece.
• Montgomery, D. C. (1977), "Procedures for Optimizing and Integrating Production and Distribution Operations," invited paper presented at the 6th Management Science Colloquium, Osaka University, Osaka, Japan.
• Friese, W. F., Jr., and D. C. Montgomery (1977), "A Cost-Optimal Approach to Selecting a Fractional Factorial Design," presented at the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee, Virginia, also in Conference Proceedings.
• Russ, S. W., Jr., D. C. Montgomery, and H. M. Wadsworth, Jr. (1977), "A Cost Optimal Approach to Selection of Experimental Designs for Operational Testing Under Conditions of Constrained Sample Size," Presented at the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee, Virginia.
• Simms, E. D. and D. C. Montgomery (1977), "The Use of Discriminant Analysis for Risk Assessment in Operational Testing," Presented at the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee, Virginia.
• Johnson, L. A. and D. C. Montgomery (1979), "Forecasting Methods in Production and Operations Management," invited paper presented at the 24th International TIMS Conference, Honolulu, Hawaii.
• Montgomery, D. C. (1979), "Methods for Combining Forecasts," presented at the 24th International TIMS Conference, Honolulu, Hawaii.
• Montgomery, D. C. and G. Weatherby (1979), "Factor Screening Methods in Computer Simulation," presented at the Winter Simulation Conference, San Diego, Calif., also in Conference Proceedings.
• Montgomery, D. C. and E. A. Peck (1981), "The Multicollinearity Problem in Regression," invited tutorial session at the Southeast Institute for Decision Sciences Meeting, Orlando, Florida, February 1980; also in Conference Proceedings.
• Montgomery, D. C. (1981), "Regression Analysis - Some Aspects of its Use in Load Research," invited paper given at the AEIC Load Research Conference, Atlanta, Georgia.
• Montgomery, D. C. (1981), "Cost Based Acceptance Sampling Plans and Process Control Schemes," invited paper presented at the AIIE Fall Technical Conference, Washington, D. C., also in Conference Proceedings.
• Montgomery, D. C. (1982), "Some Hazards of Using Regression Analysis as a Statistical Tool for Load Research," invited paper given at the AEIC Load Research Conference, Atlanta, Georgia.
• Montgomery, D. C. and D. Friedman (1982), "An Evaluation of Biased Estimators for Prediction," invited paper given at the Joint Statistical Meetings, Cincinnati, Ohio.
• Montgomery, D. C. (1983), "The Effect of Nonnormality on Acceptance Sampling Plans for Variables," presented at a Meeting of the National Academy of Science, Washington, D.C.
• Montgomery, D. C. and F. D. Baker (1983), "Statistical Modeling of Soybean Growth," Workshop on Crop Simulation, University of Illinois, Urbana-Champaign, Illinois.
• Montgomery, D. C. (1984), "Sampling Procedures for Monitoring Service Contracts," invited paper given at the Spring ORSA Meeting, San Francisco, Calif.
• Montgomery, D. C. (1984), "Improving Quality and Productivity in Manufacturing with Design of Experiments," invited presentation at the 10th Annual IBM Design of Experiments Conference, Lexington, Kentucky.
• Montgomery, D. C. (1984), "Design of Experiments in Development and Manufacturing Engineering," invited presentation at the 3rd Annual IBM Corporate Quality Conference, Austin, TX.
• Montgomery, D. C. (1984), "Economic Models and Statistical Process Control," invited presentation at the Joint Statistical Meetings, Philadelphia, PA.
• Montgomery, D. C. and C. M. Mastrangelo (1990), "Statistical Process Control Methods for Autocorrelated Data." Invited paper, JQT Session, ASQC/ASA Fall Technical Conference, Richmond, VA.
• Montgomery, D. C. and S. R. Voth (1991), "Some Practical Aspects of Designing Mixture Experiments." Invited presentation at the ASQC/ASA Fall Technical Conference, Lexington, KY.
• Mastrangelo, C. M. and D. C. Montgomery (1992), "Characterization of a Moving Centerline EWMA Control Chart," invited presentation at the ASQC/ASA Fall Technical Conference, Philadelphia, PA.
• Coleman, D. E. and D. C. Montgomery (1992), "A Systematic Approach to Planning for a Designed Industrial Experiment," invited paper, Technometrics Session, ASQC/ASA Fall Technical Conference, Philadelphia, PA.
• Montgomery, D. C. and J. E. Taggart (1993), "Selection of a Second-Order Response Surface Design," invited presentation at the SAS Users Group International Conference, New York.
• Montgomery, D. C. and C. M. Mastrangelo and C. A. Lowry (1992), 'Statistical Process Monitoring for Dynamic Systems," invited presentation at the IIE Research Conference, Los Angeles, CA.
• Montgomery, D. C. and C. M. Mastrangelo and C. A. Lowry (1993), "Statistical Process Monitoring for Aluminum Smelting," invited presentation at the 10th Annual Quality and Productivity Research Conference, Knoxville, TN.
• Montgomery, D. C. and J. A. Heinsman (1993), "Optimization of Product Formulation Using Mixture Experiments," invited presentation at the ORSA/TIMS Conference, Chicago, IL.
• Del Castillo, E. and D. C. Montgomery (1993), "Methods for Finite-Horizon Process Control: "Q" Charts and Alternative Techniques", presented at the ASQC/ASA Fall Technical Conference, Rochester, NY.
• J. B. Keats, D. C. Montgomery, G. C. Runger, and W. S. Messina (1993), "Strategies for Integrating Statistical Process Control with Feedback (PID) Controllers", presented at the ASQC/ASA Fall Technical Conference, Rochester, NY.
• Montgomery, D. C. (1993), "Solutions for Customer-Driven Quality Problems with Design of Experiments", invited tutorial at the Fall ORSA/TIMS Conference.
• Montgomery, D. C. (1993), "Planning, Conducting, and Analyzing Industrial Experiments," invited presentation at the 49th Annual Conference on Applied Statistics, Atlantic City, NJ.
• Montgomery, D. C. (1994), "Strategies for Integrating Statistical Process Control and Engineering Process Control", presented at the Conference on Computer Integrated Manufacturing in the Process Industries, Rutgers University.
• Montgomery, D. C. (1994), "The Industrial Engineer and the Quality Improvement Sciences: Have We Missed an Opportunity?", invited Keynote Address at the 8th Israeli Industrial Engineering Conference, Beer Sheva, ISRAEL.
• Mastrangelo, C. M., and D. C. Montgomery (1994), "Shift Detection Properties of Moving-Centerline EMWA Control Schemes", presented at the IIE Research Conference, Atlanta, GA.
• Montgomery, D. C. (1994), "Statistical Process Control for the Process Industries," invited short course at the Joint Statistical Meetings, Toronto, Canada, (sponsored by the Quality and Productivity Section of ASA).
• Montgomery, D. C. (1994), "Design of Experiments," invited short course at the 40th U.S. Army Design of Experiments Conference, U.S. Military Academy, West Point, NY.
• Montgomery, D. C. (1994), "Regression Analysis," invited short course at the ASQC/ASA Fall Technical Conference, Birmingham, Alabama, (sponsored by the Statistics Division of ASQC).
• Montgomery, D. C. (1995), "Response Surface Methods and Designs", invited short course at the ASQC/ASA Fall Technical Conference, St. Louis, MO, (sponsored by the Statistic Division of ASQC).
• Montgomery, D. C. (1996), "Multiple Response Optimization Methods", invited presentation at the 2^nd Congress of the International Federation of Nonlinear Analysts, Athens, Greece.
• Montgomery, D. C., and G. C. Runger (1996), "Multivariate Control Charts and Process Monitoring", invited short course at the ASQC/ASA Fall Technical Conference, Scottsdale, AZ, (sponsored by the Statistic Division of ASQC).
• Montgomery, D. C. (1997), "Response Surface Methodology", invited tutorial presented at the Southern California American Statistical Association Applied Statistics Workshop, Long Beach, California.
• Montgomery, D. C. (1997), "Some Aspects of Generalized Linear Models for Designed Experiments", Plenary Address, Nineteenth Annual Midwest Biopharmaceutical Statistics Workshop, Ball State University, Muncie, Indiana.

Other Publications

• Montgomery, D. C. and W. L. Berry (Editors) (1974), Production Planning and Control: Concepts, Techniques and Systems, Production Planning and Control Division Monograph No. 1, American Institute of Industrial Engineers.
• Montgomery, D. C. (1971), "Simulation Predicts Product Behavior," Machine Design.
• Montgomery, D. C. (1968), review: Operations Research and the Design of Management Information Systems, J. F. Pierce, ed., The Journal of Industrial Engineering, Vol. 19, No. 4.
• Montgomery, D. C. (1968), review: Fundamentals of Operations Research, Ackoff and Sasieni, The Journal of Industrial Engineering, Vol. 19, No. 7.
• Montgomery, D. C. (1969), review: Queuing Theory, J. A. Panico, in: Industrial Engineering, Vol. 1.
• Montgomery, D. C. (1970), review: Theory of Games and Strategies, Levin and DesJardins, in: Industrial Engineering, Vol. 2, No. 7.
• Montgomery, D. C. (1970), review: An Illustrated Guide to Linear Programming, S.I. Gass, in: Industrial Engineering, Vol. 12, No. 8.
• Johnson, L. A. and D. C. Montgomery (1973), review: An Introduction to Production and Inventory Control, and Production and Inventory Control: Theory and Practice, R. W. Van Ness and W. Monhemius, in: Industrial Engineering, Vol. 5, No. 12.
• Montgomery, D. C. (1975), review: Industrial Systems: Planning Analysis Control, David D. Bedworth, in: Industrial Engineering, Vol. 7, No. 1.
• Montgomery, D. C. (1975), review: Engineering Mathematics, A. C. Bajapi, L. R. Mustoe and D. Walker, In: Industrial Engineering, Vol. 7, No. 1,.
• Montgomery, D. C. (1977), review: Fundamentals of Finite Mathematics, R. L. Childress, in: Interfaces, Vol. 8, No. 1.
• Montgomery, D. C. (1977), review: Statistical Methods for Digital Computers, K. Enslein, A. Ralstan and H. S. Wolf, eds., in: TIMS Interfaces.
• Montgomery, D. C. (1980), review: Practical Experiences with Modeling and Forecasting Time Series, G. M. Jenkins, In: Journal of Quality Technology, Vol. 12, No. 1.
• Montgomery, D. C. (1981), review: Dynamic Regression: Theory and Algorithms, M. H. Pearson and L. J. Slater, in: Journal of Quality Technology, Vol. 13, No. 1.
• Heikes, R. G. and D. C. Montgomery (1981), "Productivity is Enhanced by Statistical Quality Control," Industrial Engineering, Vol. 13, No. 3.
• Montgomery, D. C. (1988), "Experiment Design and Product and Process Development," Manufacturing Engineering, Vol. 101, No. 3, September.

• Ronald G. Askin, "The Combination of Biased and Robust Estimation Techniques in Multiple Regression Models" (Georgia Tech)
• Michael P. Deisenroth, "On Simulation Methodology in Vehicular Traffic Flow" (Georgia Tech)
• Joseph D. Marsh, Jr., "Scheduling Parallel Processors" (Georgia Tech)
• Ginner Weatherby, "Aggregation, Disaggregation and Combination of Forecasts" (Georgia Tech)
• Rickey A. Kolb, "Robustness of Current Methodologies for the Analysis of Contingency Tables with Respect to Small Expected Cell Values" (Georgia Tech)
• David J. Friedman, "An Evaluation of Biased Estimators in Prediction" (Georgia Tech)
• Steven A. Yourstone, "Real-Time Process Quality Control in a Computer-Integrated Manufacturing Environment" (University of Washington)
• John S. Gardiner, "Statistical Process Control Methods for Detecting Small Process Shifts with Applications to Integrated Circuit Manufacturing" (University of Washington)
• M. K. Chua, "A Control Scheme for Multivariate Quality Control", (Arizona State University)
• D. Y. Kim, "Economic Statistical Design and Analysis for the Poisson CUSUM Control Chart," co-advisor with J. B. Keats, (Arizona State University)
• James C. C. Torng, "The Economic Statistical Design of Variables Control Charts with an Application to Exponentially Weighted Moving Average Charts," co-advisor with J. K. Cochran (Arizona State University)
• William S. Messina, "Strategies for the Integration of Engineering Process Control and Statistical Process Control," co-advisor with J. B. Keats (Arizona State University)
• Enrique Del Castillo, "Some Models and Methods for Statistical Process Control in Short-Run Manufacturing Systems," (Arizona State University)
• Christina M. Mastrangelo, "Statistical Process Monitoring for Autocorrelated Data," (Arizona State University)
• Sharad S. Prabhu, "Adaptive Sample Size and Adaptive Sampling Interval Schemes for an Control Chart", (Arizona State University)
• Diane Schaub, "Experimental Design Strategy: An Application to Rapid Prototyping of Aerospace Parts", (Arizona State University)
• Jose Andere-Rendon, "Computer-Aided Robust Design of Mixture Experiments Based on Bayesian D-Optimality", co-advisor with D. A. Rollier (Arizona State University)
• James R. Simpson, "New Methods and Comparative Evaluations for Robust and Biased-Robust Regression Estimation", (Arizona State University)
• Carole Shlaes, "Use of Chance-Constrained Programming Techniques to Determine Optimal Insurance Deductible Levels", co-advisor with J. B. Keats (Arizona State University).
• David M. Sebert, "A Clustering Approach to Finding Multiple Outliers in Linear Regression", (Arizona State University).

• Frank B. Alt, "Some Aspects of Multivariate Statistical Control Charts"
• Robert M. Baker, "An Application of Bayesian Statistical Methods in the Determination of Sample Size for Operational Testing in the U.S. Army"
• Timothy G. Fields, "Nonlinear Programming Techniques for the Multiple Response Problem"
• Richard Harris, "Economic Design of T2 Control Charts for Multivariate, Multi-State Processes"
• Joan S. Horwitz, "A Mathematical Model of an Epidemic Process"
• Jimmie K. Boles, "A GPSS II Simulation of an Air Defense Problem"
• Elwyn L. Brown, "An Application of Simulation Networking Techniques in Operational Test Design and Evaluation"
• Philip V. Coyle, "An Adaptation of Bayesian Statistical Methods to the Determination of Optimal Sample Sizes for Operational Testing"
• Geneveive M. Cruz, "A Statistical Approach to the Combination of Forecasts"
• Joseph M. Cummings, "Repairing Response Surface Experiments to Minimize Bias"
• Daniel M. Evans, Jr., "The Use of Second Order Response Surface Designs in Digital Simulation"
• David E. Ferguson, "The Development of an Adaptive Prediction and Control System"
• Claude K. Hudson, "Use of the Class of Equiradial Designs as Second Order Response Surface Designs"
• William F. Friese, "A Cost Optimal Approach to Selecting a Fractional Factorial Design"
• James M. Jerkins, "Some Algorithms for Nonlinear Regression"
• Mari Krista Jones, "A Comparison of Direct Smoothing with Short Term Forecasting Techniques for Periodic Data"
• A. K. Keswani, "Single Item Inventory Models for Back Orders and Lost Sales"
• Phillip J. Klatt, "Design of Control Charts for the Mean Vector of a Multivariate Normal Process"
• Joseph F. Mance, "Economic Design of Fraction Defective Control Charts to Maintain Current Control of a Process"
• Richard Matteson, "Minimum Bias Estimation of the Slope of a Response Surface"
• Margaret Panagos, "Economic Design of the Chart for Two Process Models"
• Ronda K. Martin, "Interactive Regression Diagnostics"
• Beth Quay, "Investigation of Methods for Determining Influential Data Points in Regression Analysis"
• Timothy G. Fields, "Nonlinear Programming Techniques for the Multiple Response Problem"
• Deborah Garner, "Regression Diagnostics for Influence with Many Influential Cases"
• Christina M. Mastrangelo, "Statistical Process Control Methods for Autocorrelated Data"
• Robert Gilby, "A Wald Sequential Ratio Test, Modified to Ignore Small Shifts in the Process Variable"
• Sheila R. Voth, "Leverage, Multicollinearity and Bias in Response Surface Designs for Mixtures"
• Nora B. Peterschmidt, "Comparison of Regression Estimates in Mixture Experiments"
• James E. Taggart, "A Comparison of Some Second-Order Response Surface Designs Based on Rotability and Prediction Variance"
• Daniel R. McCarville, "Defect Levels and Losses due to Gauge Error"
• Steven E. Somerville, "Process Capability Ratios and Non-normal Distributions"
• Richard D. Scranton, "Enhancements to the Multivariate Exponentially Weighted Moving Average Control Chart", co- advisor J. B. Keats.
• M. J. Yatskievych, "Integrating Statistical Process Control with Feedforward Control", co-advisor with J. B. Keats.

Dr. Montgomery's professional interests include several aspects of applied statistics and quality and reliability engineering, including design of experiments, time series analysis and forecasting, and applications of linear models. He also has interests in operations research and statistical methods applied to modeling and analyzing manufacturing systems. He has lectured extensively throughout the Americas, Europe and the Far East. He was a Visiting Professor of Engineering at the Monterey Institute of Technology in Monterey, Mexico, and a University Distinguished Visitor at the University of Manitoba. Dr. Montgomery has conducted basic research in empirical stochastic modeling, process control, and design of experiments. His research has been sponsored by the Office of Naval Research, the National Science Foundation, the United States Army, and private industry. He has supervised 20 doctoral dissertations and 35 masters theses.

Dr. Montgomery is an author of eleven books, including Applied Statistics and Probability for Engineers (1994, with G.C. Runger), Design and Analysis of Experiments, 4th edition (1997), Introduction to Statistical Quality Control, 3rd edition (1996), Introduction to Linear Regression Analysis, 2nd edition (1992, with E. A. Peck) ), and Forecasting and Time Series Analysis, 2nd edition (1990, with L. A. Johnson and J. S. Gardiner). Professor Montgomery has authored research papers that have appeared in many journals, including the Journal of Quality Technology, Technometrics, Management Science, Naval Research Logistics Quarterly, IIE Transactions, Communications in Statistics, IEEE Transactions on Reliability, Quality and Reliability Engineering International, IEEE Transactions on Semiconductor Manufacturing, Quality Engineering, Operational Research Quarterly, International Journal of Production Research, Journal of Spacecraft and Rockets, and Transportation Research. He has served as the Applied Probability and Statistics Department Editor and as the Quality and Reliability Engineering Department Editor for IIE Transactions and as an Associate Editor of the Naval Research Logistics Quarterly. He is a member of the Editorial Board of Quality and Reliability Engineering International, and is currently the Editor of the Journal of Quality Technology.

Dr. Montgomery's industrial experience includes engineering assignments with Union Carbide Corporation and Eli Lilly and Company. He also has extensive consulting experience with many national and international organizations.

Dr. Montgomery is a Fellow of the American Society for Quality Control, a Fellow of the American Statistical Association, and a Fellow of the Institute of Industrial Engineers, and he has held several national offices in these societies. He is a member of the honorary societies Phi Kappa Phi, Sigma Xi, Mu Sigma Rho, and Alpha Pi Mu. Dr. Montgomery was named Puget Sound Outstanding Industrial Engineer of the Year in 1986 and Engineer of the Year for 1987 by the Puget Sound Engineering Council. He is a recipient of the Shewhart Medal, the William G. Hunter Award, the Brumbaugh Award, and the Shewell Award from the American Society for Quality Control. He is also a recipient of the Ellis R. Ott Award. He has also received several outstanding teaching awards, including the Arizona State University Engineering College Graduate Teaching Excellence Award in 1994.